H50
Applications
Extracting oil from de-greasing baths
Extracting oil from soluble cutting oil baths

 

Features

The SIEBEC H50 oil extractor consists of:
• a Polypropylene filter body fitted with a fast-opening lid
• a removable Polypropylene micro-fibre container (capacity 11.5 litres)
• an automatically primed magnetic drive centrifugal pump (230V/400V –50 Hz) whose flow can be regulated by an exit valve to between 0 and 11 m3/h.
Canister
Features Advantages
Made of injected plastic (polypropylene) and FPM seals
High resistance to acids and bases
Max. fluid temperature = 70°C
Fitted with a removable polypropylene supprimé “microfibre” canister (capacity 11.5 litres) filled with a charge of 100% polypropylene microfibres. The microfibres develop a wide exchange surface and have a large capacity to hold fats and oils: a 11.5 l charge of microfibres (around 0.7 Kg) holds an average of 6 litres of oil.
They are hydrophobic, and may be compacted and incinerated.
Fitted with an automatically primed magnetic drive centrifugal pump Flow can be regulated by a valve placed at discharge.

 

The unit is made of Polypropylene and can be used without risk on acid or basic solutions up to 70°C. The joints on the pump and filter are made of PMF.

PP microfibre
The container is filled with a charge of 100% Polypropylene microfibres. It is fitted with a 50-micron gauge filter cartridge, which is replaced at the same time as the microfibres.
The microfibres develop a wide exchange surface and have a large capacity to hold fats and oils: a 11.5 l charge of microfibres (around 0. Kg) holds an average of 6 litres of oil.
They are hydrophobic, and may be compacted and incinerated. There are no special instructions regarding storage, damp or use-by date.

Catalog Oil extractor H